Automatic flat labeling machine is dedicated to the upper plane of sticker boxes, folders/bags and other types of items labeling machine, but also suitable for the plane of sticker paper and books, adding, using different overlaying mechanisms can also be used for some surface tends to be flat surface products on the upper surface labeling. Let's talk about the overall operation of this labeling machine.
Wrap around the label
1. Loosen the adjustable handle on the triangular reel to take out the triangular reel;
2. According to the direction of the marking, load the label roll, and then put the triangular material tray on and install it tightly;
3. In a clockwise direction, twist the T-shaped handle on the traction mechanism about half a turn, loosen the interval between the two axes of traction, and then loosen the two manganese plates of the pressure scale;
4.Wrap the label well according to the direction of the red arrow shown in the figure (pay attention to the entire standard belt to ensure that the parallel is not deflected as much as possible), and then gently press the standard tape with the pressure standard manganese sheet, and then twist the T-shaped handle clockwise for about half a turn, feel the pressing and falling position, and the standard is completed.
Mechanical operation: mechanical operation is generally in the case of connecting to the power supply, first in the manual state of the relevant action coordination adjustment.
1. Conveying mechanism: adjust the conveying mechanism to ensure the smooth transportation of the product to the labeling position, and smoothly send out, and place the products to be labeled on the left and right sides of the conveying mechanism for micro adjustment.
2. Labeling position adjustment: place the product to be labeled under the stripping board, adjust the labeling head up and down, front and back, to ensure that the label peeling part is aligned with the labeling position; Adjust the guiding mechanism to ensure that the label is attached to the designated position of the product; Combine the above two methods to adjust.
3.Position adjustment before and after labeling: control the order of the target through the advance or postponement detection of the electric eye of the object; Through the delay adjustment of bidding, control the order of bidding; Control the length of the second label extension with a stop delay. Combine the above three methods to adjust the label to the accurate labeling position.
Electrical operation:
Turn on the power → Turn on the two emergency stop switches to start the labeling machine→ the man-machine interface settings→ Start labeling.
